TEMPUR-PEDIC Ergo Smart Base Manual De Instalación página 6

10
SYNC THE CONTROLS FOR THE TWO BASES TOGETHER
• In order for the Sleeptracker app to function, the controls of both
bases must be connected. The customer will regain individual control
of either side when they connect the Sleeptracker app.
• Pick either base to start with.
STEP 7
Untie the black battery backup
module, then disconnect it from the
white Sleeptracker Smart Cable.
STEP 8
Plug the sync cable into the
Sleeptracker Smart Cable, in the port
where the battery backup module was
just removed.
!
Note: there is a
sync cable in each
electronics bag. Only
one is used during the
installation.
If you run into difficulty, align the
notches on the cable and the port.
11