Toto NEOREST Instrucciones De Instalación página 2

Installation Instructions (Continued)
Install the closet flange extender.
4
Attach the T-bolts to the closet flange slots.
Place a gasket on the closet flange and then
place the 3 extender plates on top of the
gasket. Place the other gasket on top of the
extenders. Lastly, place the wax ring onto the
gasket.
The wax ring should stick up higher than the
top of the NEOREST
Warning: Install both gaskets with
the lip facing downward.
Otherwise leakage will occur.
Follow the NEOREST
5
<Bowl> that came with the NEOREST
install the mounting blocks and outlet socket.
Use the longer screws from this kit to attach
the mounting blocks and outlet socket to
the floor through the NEOREST Riser.
Be careful not to bend the metal surrounding
on the NEOREST
®
NEOREST bowl section on the riser.
For best results, caulk between the NEOREST
6
bowl and the metal shroud.
®
Riser.
®
Installation Instructions
®
®
Riser when placing the
Gaskets (3)
T-bolts
600 to
Longer Screws
®
Wax Ring
Extender (3)
Closet
Flange
This side
down
NEOREST 600 Shown
®
Flange
Extender
Closet
Flange
Riser