Worx WX652 Manual Del Usuario página 10

SYMBOLS
To reduce the risk of injury, user
must read instruction manual
Warning
Double insulation
Wear eye protection
Wear ear protection
Wear dust mask
Waste electrical products should
10
not be disposed of with household
waste. Please recycle where
facilities exist. Check with your
local authorities or retailer for
recycling advice.
Random orbital sander
OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the
instruction book carefully.
INTENDED USE
The machine is intended for dry sanding of
wood,plastic, metal and filler material as well
as painted surfaces.
Machines with electronic control are also
suitable for polishing.
1. ChANGING hOOK & LOOP
SANDPAPER (See A, B)
The sandpaper and sanding plate are provided
with a hook and loop attachment system to
allow quick and easy changing of the sanding
and polishing accessories. Firstly, remove any
dust or other objects from the hook and loop
on the sanding plate and sandpaper. As the
sandpaper has dust extraction holes you must
align these with the holes in the sanding plate,
otherwise the dust extraction will not function.
(See A)
To remove the sandpaper, lift one corner of
the paper and pull off from the sanding plate.
(See B)
2. DUST BAG (See C1, C2, D)
— ATTAChING ThE DUST BAG (See C1)
Always operate your sander with the dust bag
fitted.
To attach, slide the bag onto the outlet piece
and take care that the latching lever engages.
CAUTION!
To prevent the possibility of sanding dust
or foreign body being thrown in to your face
or eyes, never attempt to use your sander
without the dust bag properly installed.
— EMPTY ThE DUST BAG (See C1, C2, D)
For more efficient operation, empty the dust
bag every 5-10mins. This will permit the air to
flow through the bag better.
Method 1: To empty the dust bag, press the
latching lever in and pull off the bag from the
dust extraction port, and shake out dust. (See
C1, C2)
Method 2: To empty the bag, rotate the bag
to the unlock position. Remove the bag and
EN