Monogram ZIW303NPPII Instrucciones De Instalación página 25

INSTALLATION INSTRUCTIONS FOR MULTIPLE UNITS (cont.)
STEP 3 REVERSE DOOR SWING (UNIT 1) (Cont.)
hinge that secure the door to the unit. Have someone
hold the door while removing these screws to keep
the door from falling.
Screws
the 2 screws per hinge that secure the hinge to the
unit cabinet.
Screws
5. Remove the trim and hinge pocket from the top of the
unit and install on the opposite sides.
6. Remove the trim and hinge pocket from the bottom
of the refrigerator compartment. Remove the control
panel and gently place in the FZ drawer.
Control Panel
7. Reinstall the control panel.
8. The hinges will be reinstalled in opposite corners. The
hinge from the top will be turned over and installed at
the bottom of the refrigerator compartment. The hinge
from the bottom will be turned over and installed at
the top of the refrigerator compartment.
Top Hinge
31-1000169 Rev. 4
Installation Instructions
Bottom Hinge
25
9. Install the screws on the refrigerator compartment
cabinet in all 4 places. Screw them in about halfway.
Screws
10. To install the top hinge, turn the hinge in the proper
direction—the section of the bracket that will be
attached to the door should be at the bottom of the
hinge. Slide the hinge over the screws and seat the
tabs into the hinge pocket. Tighten the screws.
Screws
11. To install the bottom hinge, turn the hinge in the
proper direction—the section of the bracket that will
attach to the door should be at the top of the hinge.
Slide the hinge over the screws and seat the tabs
into the hinge pocket. Tighten the screws. Close the
hinge.
12. Remove the hinge brackets from
the door and reinstall them on the
opposite end, top and bottom.
13. With another person holding the
door in place, align the holes in
the door hinge bracket with the
holes in the hinge. Install the
screws to the top hinge first.
14. Install screws on the bottom hinge next.
15. Using a Torx T-20
wrench, tighten the
tension on the hinge
springs by turning the
screws from 0 to |.
Slots for
Tabs
Door
Screws
Use Torx
T-20 Wrench