Molift Quick Raiser 205 Manual De Usuario página 16

Molift QuickRaiser 205 / www.etac.com
Plan the lifting operation in advance to ensure that
it is as safe and smooth as possible. Remember
to work ergonomically. Assess the risks and take
notes. The assistant is responsible for the safety of
the user.
Using Slings
It is important that the sling has been tested with
the individual user and for the intended lifting
situation.
Read User Manual for the sling
prior to use.
Do not to use damaged or badly
worn slings.
Slings made by other manufacturers
Only use Molift slings. Etac shall not be liable for
faults or accidents that can occur when using
slings made by other manufacturers.
Adjusting leg support
Move the Quick Raiser 205 in front of the user.
Place the feet on the footplate. If necessary - help
the user to place the feet correctly. Lock the
wheels on the lifter before lifting the user.
The optimal angle of the users joints before
lifting is 90 degrees.
Make sure the height of the leg
support are adjusted to fit the
induvidual users anatomy. The
top of the cushions should be 2
cm under the users knee
Use the turning knob to adjust the leg support
higher or lower if necessary.
Transfer
A
16
B
Make sure the user is not hanging
forward or swinging to the sides
under and before lifting or lower-
ing the user.
Alternative leg support with straps
The alternative leg support with straps can be
removed and turned 180 degrees to increase sup-
port on both inside or outside of the users legs.
C
90˚
90˚
90˚