Periodic Inspection - Molift Quick Raiser 205 Manual De Usuario

Tabla de contenido

Idiomas disponibles

Molift QuickRaiser 205 / www.etac.com

Cleaning and disinfection

Clean on a regular basis. Clean surfaces with

a damp cloth using an appropriate pH-neutral

detergent. Do not use solvents or strong liquids,

this may damage surfaces on the lifter. For

disinfection when needed; use isopropyl alcohol.

Avoid abrasive cleaning products.

• Remove lifting arm cover to clean underneath

• If nessesary, remove the knee cushion and

clean it with running water

• Remove hair and pile from the castors and

verify that the castors rotates freely.

Clean contact and hand control with isopropyl

alcohol to remove grease and dirt if necessary.

Check emergency stop after cleaning.

The lift should not be exposed to running water.

Periodic Inspection Scope

Periodic inspection is a visual examination (particu-

larly of the lifter's load bearing structure and lifting

mechanism with attachments, brakes, controls,

safety devices and person-support devices) accord-

ing to Periodic Inspection Report for Molift Quick

Raiser 205.

See www.etac.com.

If there is any problems with the

lifter that could jeopardize some-

ones safety, the lifter shall imme-

diately be taken out of service and

marked "out of order". Do not use

the lifter untill it is repaired.

Periodic Inspection shall be performed at least

once a year or more frequently if required by local

requirements. The inspection must be performed

by service personnel authorized by Etac. Contact

Etac at molift@etac.com for training and

authorization or recommendation of an approved

service partner.

Maintenance

Reconditioning

Follow cleaning and assembly procedure, complete

periodic inspection and use checklist after assem-

bly to recondition the lifter.

Recycling

Refer to "Recycling instructions" for how to prop-

erly dispose of product. See www.etac.com.

Spare Parts

A list of spare parts is available on request.