Molift Quick Raiser 205 Manual De Usuario página 17

Using a 4-point suspension
Fasten the sling to the lifting arm by guiding the
strap into all 4 hooks.
Pull the loose strap to adjust the length of the
straps. Make sure both sides have equal length.
The patient's weight ensures that the strap locks
into the lifting arm. The user must lean back
slightly when lifting, and if possible hold onto the
handles.
Removing sling
Loosen the straps again by angling the buckle and
puling the strap out.
Using a 2-point suspension
On the 2-point suspension arm the ropes is
attached to the lifting arm by pulling them firmly
from above and into the rope locks.
Removing sling
Release the band by sliding your fingers along the
rope away from the patient.
RgoSling Active can only be used
with the 4-point suspension.
RgoSling Stand Up can only be
used with the 2-point suspension.
17
Molift QuickRaiser 205 / www.etac.com