Kohler STERLING 5300EZ Serie Guia De Instalacion página 4

Turn bottom track mechanism
toward inside of bath/shower.
Stiffener
Outside of
Bath/Shower
Bottom
Track
2. Install the Tracks
Install the Bottom Track
Position the bottom track on the bath/shower ledge with the track lip toward the outside of the
bath/shower.
NOTE: Tighten the expansion mechanism until the bottom track fits firmly against the wall jambs and the
wall jambs are flush against the wall.
Insert the provided large hex wrench into one of the holes in the expansion mechanism.
Use the provided hex wrench to turn the expansion mechanism toward the inside of the
bath/shower until the bottom track fits firmly against the wall jambs.
Install the Top Track
Slide both caps towards the center of the top track.
Position the top track on top of the wall jambs with the rounded side of the track toward the
outside of the bath/shower.
Insert the provided large hex wrench into one of the holes in the expansion mechanism (located on
the right side of the top track).
Use the hex wrench to turn the expansion mechanism toward the inside of the bath/shower.
As the top jamb is tightening, position the slip-resistant portion of the clamp next to the walls and
the tab portion against the wall jamb. Do not overtighten.
NOTE: When the top track is properly tightened, the nut will be flush against the top track extension.
Tighten the expansion mechanism one or two complete turns after the clamps fit flush against the
walls.
1011075-2-F
Stiffener not
shown for clarity.
Expansion
Mechanism
Clamp
Clamp
Tab
Wall
Jamb
Nut
4
Slip-Resistant
Pad
Position the tab on
clamp against wall
jamb.
Top Track
Cap
Sterling