Iso Din Radio Provision With Pocket - Metra 99-5027 Instrucciones De Instalación

Ford Mustang 2001-2004/Expedition
2003-2006/Explorer 2002-2005, Lincoln Aviator
2002-2005/Navigator
(without NAV)
Mercury Mountaineer 2002-2005
:
not listed above go to page 12)
1. Secure the ISO brackets to the back of the radio
housing with (2) #8 x 3/8" Phillips screws with the
front edge of the bracket inside the radio opening.
(Figure A)
Kit Assembly 99-5027
ISO DIN radio provision
(Figure A)
(without NAV)
2. Slide the aftermarket radio into the radio opening
2003-2006,
and secure with the radio's supplied screws.
(if your vehicle is
(Figure B)
3. Mount the support to the back of the radio using the
hardware included with the unit. (Figure B)
Note: On Ford Expedition and Lincoln Navigator DIN
(Figure B)
with pocket
10
head and ISO kit assemblies you must cut the rear
support bracket for clearance. (Figure C)
4. Snap trim plate into the radio housing. (Figure B)
5. Locate the factory wiring harness and antenna plug
in the dash. Metra recommends using the proper
mating adapters from Metra and/or AXXESS.
6. Reassemble dash in reverse order of disassembly.
Rear view, radio
Rear support bracket
(Figure C)