Din Radio Provision With Pocket - Metra 99-5027 Instrucciones De Instalación

Ford Mustang 2001-2004/Expedition
2003-2006/Explorer 2002-2005, Lincoln Aviator
2002-2005/Navigator
(without NAV)
Mercury Mountaineer 2002-2005
:
not listed above go to page 11)
1. Slide the DIN cage into the radio housing and
secure by bending the metal locking tabs down.
(Figure A)
(Figure A)
Kit Assembly 99-5027
DIN radio provision
2. Slide the aftermarket radio into the cage and
(without NAV)
secure. (Figure B)
2003-2006,
3. Mount the support to the back of the radio using
(if your vehicle is
the hardware included with the unit. (Figure B)
Note: On Ford Expedition and Lincoln Navigator
DIN head and ISO kit assemblies you must cut the
rear support bracket for clearance. (Figure C)
(Figure B)
with pocket
9
4. Locate the factory wiring harness and
antenna plug in the dash. Metra recommends
using the proper mating adapters from Metra
and/or AXXESS.
5. Reassemble dash in reverse order of disassembly.
Rear view, radio
Rear support bracket
(Figure C)