1. Slide the DIN cage into the radio housing and secure by bending the metal
locking tabs down. (Figure A)
2. Secure the mounting bracket to the back of the radio housing with (2) 3/8"
Phillips pan-head screws supplied. (Figure B)
3. Slide the aftermarket radio into the cage and secure. (Figure C)
4. Slide the rear support onto the mounting bracket and mount the support to the
back of the radio using the hardware included with the unit. (Figure C)
5. Locate the factory wiring harness and antenna plug in the dash. Metra
recommends using the proper mating adapters from Metra and/or AXXESS.
6. Reassemble dash in reverse order of disassembly.
(Figure A)
Kit Assembly 99-5027
DIN radio provision
(Figure B)
(Figure C)
11
Rear support bracket
Rear view, radio