Optional Installation - Tripp-Lite SmartPro SMART1500CRMXL El Manual Del Propietario

Quick Installation
4 Turn the UPS ON.
Press and hold the "ON/OFF/STANDBY" button
for one second. The alarm will beep once
A
briefly after one second has passed. Release the
button.
Note: UPS system will function properly upon initial
startup; however, maximum runtime for the unit's
battery will only be accessible after it has been
charged for 24 hours.

Optional Installation

These connections are optional. Your UPS will function properly without these
connections.
1
USB and RS-232 Serial
Communications
Use the included USB cable (see
DB9 serial cable (see
communication port on your computer to the
communication port of your UPS. Install on your
computer the Tripp Lite PowerAlert
appropriate to your computer's operating
system.
19-01-060-932757.indb 8
) or
1a
) to connect the
1b
Software
®
8
A
4
1a
1b
1/21/2019 9:56:39 AM