Bartscher 110801 Instrucciones De Servicio página 38

Digital temperature regulator
The default temperature is set at the factory and corresponds to an internal operating
temperature of 0 ° C – 10 °C.
During normal operation the display will show the temperature as detected by the sensor.
Active functions will also be shown (table 1), while three buttons can activate/deactivate
some functions (table 2).
Indicators
Diode Function
➀
Compressor
➁
Ventilator
➂
Defrost
Auxiliary
➃
output
➄
RTC clock
➅
Alarm
Digital
➆
indicators
- 34 -
Normal operating mode
ON OFF
On OFF
On OFF
On OFF
Active Inactive
output output
RTC available, RTC
active (tEN=1) unavailable or
and at least inactive
1 programmed (tEN=0)
time cycle or no
programmed
time cycle
No active
Alarm active
alarm
Composed of three segments with decimal point and
division - 199...999. See parameters /4, /5, /6 for
sensor reading indicator. Values in ° C/° F and
decimal point.
Tab. 1
Start-
up
FLASHING
Activation ON
Activation ON
Activation ON
- ON
ON
- ON