Replacing The Lamp - Klarstein Zermatt Manual Del Usuario

EN
16

REPLACING THE LAMP

This fireplace consists 1 bulb that illuminates flame effect. Light bulb needs to be
replaced if you notice a dark section of the flame or when the flames lose clarity.
Important Notes for Replacing the Lamp
• Always disconnect from the power outlet before removing bulbs, to reduce the risk
of fire, electric shock or damage to property.
• The bulb reaches high temperatures during operation. Allow it to cool down before
replacing it.
• Access the bulb panel located on the rear panel of the fireplace (see fig)
Screws
• Remove screws, and slide the panel lid off.
• Replace the bulb with a new. Extra caution should be taken, as the bulb could be
very hot.
• Replace the panel lid using screws.
Note: Do not use fireplace without putting the lid in place.
Bulb