Proper Installation; Before You Begin - DuPont QuickTwist WFQT13000 Serie Instrucciones De Instalación

Proper Installation

Please read all instructions, specifications, and precautions before installing and using your water filter system.
C UTION
This filter must be protected Because of the product's limited service life and to prevent costly repairs or possible water damage, we strongly
from freezing, which can recommend that the head of the filter be replaced every ten years. If the head of the filter has been in use for
cause cracking of the filter longer than this period, it should be replaced immediately. Date the top of any new head to indicate the next
and water leakage. recommended replacement date.
Precautions:
For cold water use only.
fter prolonged periods of non-use (such as during a vacation), it is recommended that the Filter System be flushed thoroughly. Let water
run for 10 minutes before using.
The QuickTwist™ Filter used with this Filter System has a limited service life. Changes in taste, odor, and/or flow of the water being
filtered indicate that the filter should be replaced.

Before You Begin

n
Check under the sink to locate a solid wall surface to mount the Filter System.
NOTE: The Filter System must be mounted in a vertical position.
n
Locate the cold water pipe under your sink and observe if it is a flexible hose or a rigid pipe (ex: plastic, metal, copper). Rigid pipes
may require cutting in order to make adequate space to install the Kitchen Faucet dapter (see Step 2). lso determine if you have
all appropriate fasteners and adapters to fit your plumbing.
n
Consult your local plumbing codes and install accordingly.
n
If you plan to install your QuickTwist
n
If you purchased a QuickTwist
STEP 1
Turn Off the Main Water Supply Line
1
Locate the cold water shut-off valve under the sink. Turn off the cold water supply to the existing kitchen sink.
NOTE: If uncertain about which line supplies the cold water, turn on the hot water to the faucet. llow the water to heat up and carefully
feel the pipes under the sink. The pipe that remains cool to the touch is the cold water supply.
2
Turn on the cold water faucet on the kitchen sink to release pressure and allow water to completely drain from the line.
WFQT13000 & WFQT13500 Series
C UTION
TM
WFDW13000 Series direct to your kitchen faucet please skip to page 10.
TM
WFDW13500 Series and you plan to direct connect to your kitchen faucet please skip to page 10.
4
KITCHEN F UCET
HOT W TER COLD W TER
V LVE V LVE
RIGID PIPE INST LL TION
KITCHEN F UCET
HOT W TER COLD W TER
V LVE V LVE
FLEXIBLE HOSE INST LL TION
1
F UCET FOR
FILTERED W TER
F UCET FOR
FILTERED W TER
COLD W TER
V LVE