Publicidad
Idiomas disponibles
Idiomas disponibles
Hi-Cut: Eliminates high frequency interferences. Has to be used
in accordance with the reception conditions.
COMPANDER
Press the F key (7) .
-
Press the ANL/NB key (9) to activate/deactivate the compander.
-
When the COMPANDER is active
This switchable filter allow to improve the reception mode.
10) MODE ~
MODE
(short press)
This key allows you to select the modulation mode (AM or FM).
Your modulation mode has to correspond to the one of your
correspondent. Corresponding mode is displayed on the LCD.
Amplitude Modulation / AM: communication on a field with relief
-
and obstacles at middle distance (the most used).
Frequency Modulation / FM: for nearby communications on a
-
flat open field.
In U configuration ONLY: press MODE key (10) to alternate the
frequency band between ENG and CEPT. "UK" appears in the
display when the ENG band is selected. "UK" disappears from
the display when CEPT is selected (see table at page 56).
(long press)
-
Turn on the unit.
-
Long press the
-
Quickly press the s or t key (3) to select between the 4 possible
lights :
-
Long press the
11) MANUAL SQUELCH-
Short press the SQ- key (11) to decrease the level of the manual
squelch.
12) MANUAL SQUELCH+
Short press the SQ+ key (12) to increase the level of the manual
squelch.
Manual squelch of:
is displayed.
key (15) to switch on the flashlight.
key (15) to switch off the flashlight.
(short press)
(short press)
or 34 levels from
14
appears on the LCD.
to
.
Publicidad
Capítulos
