Eco Mode - PRESIDENT RANDY III El Manual Del Propietario

5. Press the MENU key (4). A short press to validate and stay in the
MENU or a long press to validate and exit the MENU.
6. If no key is pressed, the unit exits the MENU after 10 seconds
without saving the modifications.
Default value is OF.
3) KEY BEEP
When the function is activated, a beep sounds when a key is
pressed, by changing the channel etc. "BP" appears on the
display when the function is active.
1. Long press the MENU key (4) to enter the MENU.
the display.
2.
Press the s or t key (3) to select the
3. Short press the MENU key (4) to validate. The current value blinks.
4. Press the s or t key (3) to activate On or deactivate OF the KEY
BEEP function.
5. Press the MENU key (4). A short press to validate and stay in the
MENU or a long press to validate and exit the MENU.
6. If no key is pressed, the unit exits the MENU after 10 seconds
without saving the modifications.
Default value is On.

4) ECO MODE

This function allows to save your battery. The unit goes in standby
mode, LCD backlit out, RX in standby*, etc.
1. Long press the MENU key (4) to enter the MENU.
the display.
2.
Press the s or t key (3) to select the
3. Short press the MENU key (4) to validate. The current value blinks.
4. Press the s or t key (3) to deactivate OF the ECO MODE func-
tion or select between the 3 levels 01 (Low), 02 (Middle) and 03
(High).
5. Press the MENU key (4). A short press to validate and stay in the
MENU or a long press to validate and exit the MENU.
6. If no key is pressed, the unit exits the MENU after 10 seconds
without saving the modifications.
Default value is 02 (Middle).
*Level 01: 250 ms RX active / 250 ms RX inactive
*Level 02: 250 ms RX active / 500 ms RX inactive
*Level 03: 250 ms RX active / 1 s RX inactive
17
appears on
menu.
appears on
menu.