Product Description - GCE MediFlowTec Instrucciones De Uso

5. PRODUCT DESCRIPTION

Gas from the medical gas pipeline system is entering through the inlet
connector (A). There are two basic versions: 1 – inlet connector is directly
mounted on the flow selector, 2 – connection to the rail, including hose
and inlet connector. Flow is then adjusted to the requested value by turn-
ing handwheel (B). The adjusted flow is visible in the window of the hand-
wheel /on the pointer (C). Gas is delivered to the user through the flow
outlet user connection (D).
A
A. INLET QUICK CONNECTOR
The flow selector is fitted to the medical gas pipeline system terminal unit
or to medical regulator by a gas specific male probe.
B. HANDWHEEL
Requested gas flow can be adjusted by turning the handwheel to set the
required value in the viewing window / pointer (calibrated in l/min). By the
handwheel is possible to close the gas flow – adjusting value "0".
C. READING WINDOW
Adjusted value of the gas flow is visible in reading window / on the top
side of the pointer.
D. USER OUTLET
The "flow outlet" user connection is usually with connection for hose (hose
nipple) or threaded (for humidifier).
This outlet is for supplying a gas flow (l/min) atmospheric pressure directly
to a patient, e.g. through a cannula or a facemask.
C
D
A
C
D
B
B
5/84
C
D
C
B
EN
A