Bowflex SelectTech BD1090 Instrucciones

®
If you have questions, please contact your local distributor. To find your local distributor, go to: www.bowflexinternational.com
This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury. Read and understand all Warnings on this machine.
The following procedure will make it easier to remove
your SelectTech dumbbell from its packaging.
®
The dumbbell is heavy. Ask for assistance if necessary.
• Open the top flaps of the shipping box and remove the
upper section of foam.
• Remove the reusable Restraint Strap. See 1.
Set selection numbers on the adjustment knobs to 41 on
•
both ends of dumbbell (
(see 3). If necessary, set the knobs to a lower weight and
remove the dumbbell and weight plates separately.
Remove the base from the package, and place on floor or
•
dumbbell stand
. See 4.
Place dumbbell in the base
•
When moving the dumbbell assembly, use the handles that are
molded into each end of the base.
1
3
Nautilus, Inc., www.nautilusinternational.com | Printed in China | © 2012 Nautilus, Inc.
SelectTech BD1090 International Dumbbell Unpacking Instructions
®
®
Remove the plastic wrapper.
), and remove the dumbbell
see 2
.
3mm
Note: If the dumbbell assembly is to be used for retail display,
secure the dumbbell with the reusable strap after
assembly.
Restraint strap
In a retail display setting, the restraint strap allows enough
movement for demonstration, but prevents damage to the unit
and helps to avoid dropping and/or misuse by consumers.
2
4
1
8000771.051517.C
X2