Switching The Appliance On And Off; Starting And Stopping The Cooking Cycle - Angelo Po 091FR1ID Manual De Uso Y Instalación

Lighting
1 - Operate the appliance's master switch to con-
nect it to the electrical mains.
The mains light (P) comes on.
2 - Turn on the gas supply tap.
3 - Press key (B) to set the appliance in "stand-by"
mode.
The mains power on light (P) goes out and the
display (A) shows the screen shown here.
4 - Press the key (B) to switch on the appliance
and start the cooking cycle.
The cooking temperature set will appear in red
on the display (A).
IT IT
GB GB
To start and stop the appliance, proceed as follows.
Starting
DE DE
1 - Switch on the appliance (see page 12).
2 - Press key (B) and then key (E) to activate the
FR FR
oil "melting" procedure.
ES
ES
English

SWITCHING THE APPLIANCE ON AND OFF

B
P

STARTING AND STOPPING THE COOKING CYCLE

P B
C
Turning off
1 - Keep the key (B) pressed for about 6 seconds
to stop the cooking cycle and switch the appli-
ance off.
The mains light (P) comes on.
2 - Turn off the gas supply tap.
3 - Cut off the mains electricity supply using the ap-
pliance's master switch.
A
When the preheating temperature is reached
the beeper sounds.
3 - Press key (E) to deactivate the "melting" func-
tion.
The temperature is maintained at 90°C until
cooking starts.
A Q
F G
- 12 -
E
IDM-39619400700A.tif
IDM-39619400700B.tif