Handling And Lifting; Installation Of The Appliance - Angelo Po 091FR1ID Manual De Uso Y Instalación

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

HANDLING AND LIFTING

The appliance can be handled using fork-lift or hook
equipment of suitable load-carrying capacity. Be-
fore lifting, check the position of the load's centre of
gravity.
Important
When engaging with the lifting equipment,
watch out for the gas supply pipe.

INSTALLATION OF THE APPLIANCE

All installation stages must be considered right from
production of the general layout. Before starting
these stages, as well as deciding the place of instal-
lation, if necessary, the person authorised to carry
out these operations must organise a "safety plan"
to protect the people directly involved, and he must
also ensure strict compliance with all legal require-
ments, especially those relating to mobile work-
sites.
The place of installation must have all the connec-
tions needed to supply the appliance and dispose of
the production residues, must be suitably lit and
must meet all legal health and hygiene require-
ments to prevent the contamination of the foods.
If necessary, fix the exact position of each individual
appliance or subassembly by mark coordinates to
locate them correctly.
The appliance must be installed at least 100 mm
from the walls (at the rear and/or sides).
Install in accordance with the relevant legislation,
regulations and specifications in the country of use.
Important
Do not install the appliance beside walls
with a fire risk.
min 100 mm
100
mm
min 100 mm
- 21 -
IDM-39614601200.tif
IT
GB
DE
FR
IDM-39619401400.tif
ES
English

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

191fr2id

Tabla de contenido