Oemframe.INi - Siemens SINUMERIK 840Di sl/840D sl Manual De Instrucciones

[Fresar2]
logChanList = Channel21, Channel22, Channel23, Channel24, Channel25
[Channel21]
logNCName = NCU_2
ChanNum = 1
[Channel22]
logNCName = NCU_2
ChanNum = 2
[Channel23]
logNCName = NCU_2
ChanNum = 3
[Channel24]
logNCName = NCU_2
ChanNum = 4
[Channel25]
logNCName = NCU_2
ChanNum = 5
A.19

OEMFRAME.INI

Sinopsis
En el fichero OEMFRAME.INI se configura el comportamiento de arranque de las
aplicaciones OEM.
[SysMeter]
; let OEMFrame just look for Windows which have been
; created by the OEMApp
; default is 0 (means NO)
;fSearchOnlyForTaskWindow=1
; let OEMFrame delay INIT_COMPLETE, if set to -1,
; OEMFrame will not send any WM_INITCOMPLETE at all,
; this value must be given in microseconds
;nDelayInitComplete=10000
; switching WS_SYSMENU, WS_MINIMIZEBOX and WS_MAXIMIZEBOX off
WindowStyle_Off = 720896
; other possible task entries aren't used
WindowStyle_On =
x =
y =
HMI-Advanced
Manual de puesta en servicio, 11/2006, 6FC5397-0DP10-0EA0
Lista de los ficheros INI
A.19 OEMFRAME.INI
179