EuroSteam STONE GLIDE 6198 Manual De Instrucciones página 8

*
Demonstration video and trouble shooting at www.redfernent.com*
Why is my iron leaking water?
*Boiler has not been primed, see top of page 5 for instructions
*Indicator light is on while pushing the steam button, wait for indicator light to go out before
ironing
*The iron may be over lled, depress steam button a few times to steam out e cess water
*Iron safety cap may not be tight enough
*The iron is cooling down due to not using the iron immediately after the indicator light shuts
off (As a safety feature the Eurosteam ® will automatically drop temperature after appro ima-
tely 1-2 minutes of non-usage, holding the steam button down until the indicator light comes
on and wait for the indicator light to shut off and it is once again ready for use immediately).
Why do I have to empty my iron after every use?
You should empty your iron after each use. This will ensure that when you use the iron ne t,
it will not be over lled and any remaining water inside your iron may calcify inside the iron.
This will require you to clean your iron more frequently.
What water do I use to ll the iron?
Please refer to page 5 section 1
Why does my iron run out of steam quickly?
We do suggest to use your steam button only on demand. Two seconds of depressing the
button produces four (4) to eight (8) good seconds of steam pro ections. By pressing this
button intermittently (once every 5-10 seconds) this will allow you a good amount of steam.
Once you have mastered this, you will never go back to any other iron!
How do I clean my iron?
See page 7 section 5
Why does the indicator light come on while the iron is in use?
When the water inside the boiler begins to cool, the indicator light will come on indicating
that the iron is heating. Once the water in the boiler reaches the optimal temperature, the
indicator light will shut off. It is very normal to see it repeating itself. Especially if you are
ironing for more than 10 minutes at a time, ust keep ironing.
Why does my iron loose pressure while steaming?
As you use the steam button, the pressure within the boiler is decreasing. You may notice
your iron slightly losing pressure when you are priming the boiler. Or if the indicator light has
come on, you may choose to allow your iron to rebuild the pressure until the indicator light
goes off.
8
TROUBLE SHOOTING/FREQUENTLY ASKED QUESTIONS