CORD LOOP CORD TENSION DEVICE
•
Cord Loop Shades will arrive with the tension device mounted
to the cord.
•
Use the included screws to secure the hold down tension device to the
mounting surface, ensuring that the cord loop is taut.
•
SEE WARNING LABEL ON SHADE
INSTALL THE TENSION DEVICE
•
Slide the cord tensioner down to the bottom of the cord loop.
•
Using the screws provided, attach the tension device to the wall, allowing
some slack for the cord to slide through easily.
IMPORTANT: When installing into drywall or plaster, use
anchors (size
⁄
", not included) before inserting the screws. When installing in metal,
1
2
use appropriate anchors for metal material.
IMPORTANT: The tension device provides smooth operation of the shade. The
shade will not operate properly unless the tension device is installed.
WARNING: It Is imperative that the cord tensioner be properly
secured to the wall or window frame to reduce children's access to
!
the cord loop. Young children can strangle in cord loops. They can
also wrap cords around their necks and strangle.
Continuous Cord
Loop Tension Device
INSTALLATION - ADDITIONAL COMPONENTS
⁄
" drill bit and insert wall
3
16
Installing the Tension Device
Cord Loop Lift Control
15