Cleaning And Care Cleaning Procedures; Additional Notes - Levolor Roman Shades Instalación

CLEANING AND CARE
CLEANING PROCEDURES
A brush-type vacuum attachment or feather duster should be used for cleaning. If your
shade should become stained, you may clean it by dabbing the spot with a sponge
dampened with lukewarm water. Do not immerse shade in water. Avoid contact with
window cleaning products as these may discolor your shade. Ultrasonic cleaning is not
recommended or covered by our warranty. Improper cleaning may damage the shade
and void warranty.
DUSTING
Use a feather duster for regular cleaning.
FORCED AIR
Blow away dirt and debris using clean compressed air.
PROFESSIONAL INJECTION/EXTRACTION CLEANING
Call local on-site blind/shade cleaner that injects a cleaning solution
into the fabric and extracts the dirty solution at the same time. The
service is typically performed at home so you do not need to remove
your window treatments.
VACUUMING
Use a low suction vacuum with a brush-type cleaner attachment;
stroke lightly over the shade to clean.
SPOT-CLEANING/STAIN REMOVAL AT HOME
Use warm water and a mild soap, like Woolite
if needed. Do not immerse shade in water.

Additional Notes

• Once mounted, leave the shade in the lowered position for 48 hours to
release any wrinkles in the fabric.
• Shades made from patterned fabrics may differ slightly in the location of
of the pattern from shade to shade. This is due to normal variation in the roll
from which the fabric is cut for the shade.
• With time, soft folds may settle or flatten. Shades that are raised regularly
will be less subject to settling and will maintain a more relaxed appearance.
18
Cord Loop Lift Control
or Scotchgard ,
® ®