Installation - Additional Components; Installing The Valance; Extension Brackets; Spacer Blocks - Levolor Roman Shades Instalación

INSTALLATION - ADDITIONAL COMPONENTS

INSTALLING THE VALANCE

Install Valance
• Hook the top of the valance over the
top lip of the headrail.
• Carefully press the valance down and
back against the headrail until the
valance clips into place.
Attach Valance Returns (Outside Mount Only)
• Fold the valance returns around the end of the headrail and firmly
press into place so that the hook-and-loop strips engage.
EXTENSION BRACKETS (optional)
•
Optional extension brackets offers clearance for obstructions.
•
Outside mounting extension brackets
will provide 1–3" clearance between the
headrail and mounting surface. Assemble
extension bracket as shown.
•
Secure an extension bracket to each
standard mounting bracket.
SPACER BLOCKS (optional)
•
Outside mounting spacer blocks will provide
an additional ⁄ " clearance as shown.
3
8
•
If spacers are used, longer screws may be
required to ensure a secure installation
(not provided).
! CAUTION: Do not use more than one spacer block. Using more than one
spacer block could cause shade to fall resulting in possible injury.
HOLD-DOWN BRACKETS (optional)
•
Ideal for doors, hold-down brackets prevent
shade from swaying. Assemble as shown to
each side of bottom rail.
14
Cordless Lift Control
19-0050-030 Romans Install Guide-Cordless_F_070720.indd 14-15
Valance
Valance
Return
CORDLESS BOTTOM-UP
•
To lower the shade, grasp the handle on the bottom rail and pull down until desired
location is reached. Release and the shade will stay in place.
•
To raise the shade, grasp the handle on the bottom rail and push up until desired
location is reached. Release and the shade will stay in place.
Bottom-Up Shade
CORDLESS TOP-DOWN / BOTTOM-UP
•
To raise or lower the middle rail, grasp the handle on the middle rail and push up or
pull down until desired location is reached. Release and the shade will stay in place.
•
To raise or lower the bottom rail, grasp the handle on the bottom rail and push up
or pull down until desired location is reached. Release and shade will stay in place.
Top-Down/Bottom-Up Shade

OPERATION

15
Cordless Lift Control
7/7/20 9:11 AM