Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Using the Remote Control
Before using the remote for the first
time, remove and discard the plastic
insulation tab as shown.
Aim the IR emitter of the remote control at the remote
sensor and then press a key.
The remote control will work within 16 feet of the re-
mote sensor and within 30 degrees from center.
L
⚠
Obstacles between the unit and transmit-
ter may prevent the remote control from
Page 10
working. Direct sunlight, incandescent or
fluorescent lamps, or any other strong
light shining on the remote sensor of the
unit may prevent the remote control from
working properly.
Replacing the Battery
The remote control is powered by one (1) "CR2025"-
type battery.
1. Squeeze the tab of the battery com-
partment to the right while drawing
the battery tray out.
2. Take note of the orientation of the
existing battery. Replace it with a new
"CR2025" lithium battery, making
sure to match the polarity of the old
battery (as well as the +/- markings
on the remote control.
3. Push the tray back into place.
L
⚠
The battery in the remote will
last for approximately 1 year. Replace the
battery if the remote control does not
Naxa Electronics
Publicidad
Tabla de contenido
