Connecting Power - Naxa NHS-7008 Manual De Operación

work. Always dispose of batteries accord-
ing to your local municipal regulations.
⚠
⚠
The batteries used in the remote control
may present a fire or chemical burn if
mistreated. Do not recharge, disassemble,
incinerate, or heat the battery (~212°F). Do
not mix old with new batteries, or different
types of batteries. Remove the batteries
from the remote if it will not be used for a
long period of time. Keep batteries away
from children.
Do not spill water on the remote control.
Do not use the remote control for other
equipment at the same time.
Battery Precaution
Heed the following when handling the battery used in this device.
1. Use only the size and type of battery specified.
2. Be sure to install the battery properly by matching the polarities indi-
cated in the battery compartment. Installing a battery with reversed
poles may cause damage to the device.
3. Remove the battery from the device if it is empty or will not be used
for a long time to prevent damage or injury from leakage.
4. Do not charge a battery that is not designed for charging.
www.naxa.com

Connecting Power

Use the included AC power adapter to connect the unit
to AC household power.
• Connect the two-pronged end of the adapter to a
household power outlet.
• Connect the barrel plug end of the adapter to the
⚠
Power socket [10] of the unit.
⚠
The adapter supports AC 100-240V power
only. Do not connect the power adapter to
a power outlet other than that which is in-
dicated here and on the rating label of the
power adapter as this may result in the risk
of fire or electric shock.
Disconnect the unit from power if it will not
be used for a long time.
Do not handle the power plug with wet
hands. Doing so may cause electric shock.
Do not use the adapter with any other power
source.
Page 11