Technical Description - Scott Safety FH1 Instrucciones De Funcionamiento Y Mantenimiento

FH1, FH2 & FH21

TECHNICAL DESCRIPTION

The FH1, FH2 and FH21 headtops are a range of protective headtops designed to be used
alongside Scott Safety powered air purifying respirators (PAPR), and one of three types of
breathing hose.
They are approved to EN12941-TH3.
• FH1 is a full face hood, manufactured from polyurethane-coated nylon, visor manufactured
in Poly Ethylene Tetra Glycol (PETG)
• FH2 is a full face hood, manufactured from polyurethane-coated nylon with added
protection of a full neck cape, PETG visor
• FH21 is a full face hood, manufactured from polyurethane, encased between two layers of
textured, nonwoven, polypropylene anti-static material, PETG visor.
When used with a Scott Safety PAPR, these headtops are designed to be used alongside three
types of breathing hose:
1. 400mm Polyurethane self adjusting - Scott PU Stretch 400
2. 850mm Polyurethane non-stretch - Scott PU non-stretch
3. 800mm Ethylene Propylene Diene Monomer - Scott EPDM
The choice of hose is dependent on your own work practises/needs and is beyond the scope
of this manual. For further information contact Scott Safety customer services, details at the
rear of this manual.
The FH1, FH2 and FH21 headtops are fully adjustable to fi t head sizes with a horizontal
measurement of 53 - 65cm (measured at brow level, full circumference) and a vertical
measurement of 53 - 72cm (measured under the chin, full circumference)
This series of headtops use an internal soft elasticated 'head net' with a lightweight browband,
complete with comfort sweat-band, and a neoprene faceseal, allowing the headtops to be fi tted
easily and with comfort.
FH1, FH2 and FH21 are designed to operate with a fl ow rate of between 120 litres per minute
and 220 litres per min and are compatible for use with Scott PAPR systems (EN12941 TH3)
Please read this manual in conjunction with the respective system manual prior to use.
All new headtops are supplied with a protective fi lm secured onto the
visor. This fi lm is for transit purposes only and must be removed prior to
Note
the headtop being used.
2