Maintaining The Appliance - Dirt Devil PICK UP PLUS DD2651-1 Manual De Instrucciones

Maintaining the appliance

Emptying the dust bin
Switch off the appliance and pull the plug from
1
the socket. Press the dust bin release catch
2
(Fig. 1 / ) and remove the dust bin from its console
5
in the appliance (Fig. ).
13
3
above a waste bin and release the dust bin (Fig.
Dispose of the contents of the dust bin in a waste
4
bin. Gently tap out the dust bin to remove any soil-
ing. Close the emptied dust bin.
5
dust bin into its console in the appliance so that you
feel it click into place.
Cleaning the separator and filter
NOTE:
The appliance, the separator and the pre-motor
filter should be cleaned regularly in order to
maintain the suction power.
Remove the dust bin from the appliance, >"Emp-
1
tying the dust bin" on page 19.
bin cover in the anti-clockwise direction and lift it off
(Fig. 15 ). Remove the pre-motor filter (Fig.
3
Release the separator cover by turning it in the
4
clockwise direction (Fig.
17
from the separator (Fig. 18
and dispose of the content in a waste bin (Fig.
Rinse the pre-motor filter and the separator
7
out thoroughly under running water.
cleaned parts to dry completely for at least 24 h.
Insert the separator cover into the separator.
9
Secure the separator cover by turning it in the an-
ti-clockwise direction (Fig.
tor, together with the separator cover, into the dust
bin (Fig. 20 ). Place the pre-motor filter on the
12
dust bin (Fig. ). Screw the dust bin cover onto
21
13
the dust bin by turning it in the clockwise direction.
Re-insert the dust bin into its console on the ap-
14
pliance body. You must be able to feel the dust bin
click into place.
Cleaning the exhaust filter
CAUTION!
The fine fins on the exhaust filter are sensitive.
Never clean the fins with water and only ever use
soft brushes for cleaning.
Place dust bin closely
).
14
Re-insert the
6
Unscrew the dust
2
16 ).
). Remove the cover
5
). Remove the separator
6
19 ).
Leave the
8
10
). Insert the separa-
17
11
EN
NOTE:
Replace any damaged, discoloured or deformed
exhaust filters with new ones.
Screw the exhaust filter cover in the anti-clock-
1
wise direction and remove it from its console on the
appliance body (Fig. 22
ter (Fig. ). Carefully tap out the exhaust filter.
23
3
Carefully clean the exhaust filter with a soft brush.
4
Re-insert the exhaust filter into its console on the
5
appliance. Refit the exhaust filter cover.
6
the exhaust filter cover by turning it in the clockwise
direction.
Cleaning the mini turbo nozzle
Disconnect the mini turbo nozzle from the suc-
1
tion hose or the telescopic tube.
off upwards (Fig. ).
24
3
ance top of the mini turbo nozzle (Fig.
oughly clean the brush by hand. In case of stubborn
soiling, carefully use tweezers or scissors (Fig.
Place the appliance top on the 4 tabs on the appli-
5
ance bottom and then carefully close the appliance
top (Fig. ). Push the circlip back on.
27
6
Accessories
• Filter set (1 pre-motor filter, 1 exhaust filter) –
2620001 (Fig. 28 /A)
• 1 Long flexible crevice nozzle – M232 (Fig.
• 1 Mini turbo nozzle "Fellino" – M219 (Fig.
• 1 Parquet brush – M203-5 (Fig.
(*) optional
Troubleshooting
Before you contact our customer service department
or send the appliance to the Dirt Devil customer ser-
vice department, you will find a lot of additional in-
formation in the service area of our website which
will help you solve problems.
www.dirtdevil.de/service
!
WARNING!
Switch off the appliance before you start trouble-
shooting. Never use a faulty appliance.
). Remove the exhaust fil-
2
Secure
7
Push the circlip
2
Carefully open up the appli-
). Thor-
25
4
26 ).
/B) (*)
28
/C) (*)
28
28 /D) (*)
19