For Your Safety; Safety Instructions - Würth ANALOG 60 Traducción Del Manual De Instrucciones De Servicio Original

GB
Please read this instruction manual
before using the device for the first
time and comply with it.
Keep this instruction manual for
future reference or for subsequent
possessors.
Note
It is not allowed to modify the device
or to manufacture additional devices.
Such modifications can cause injuries
and malfunctions.
Only authorised and trained personnel are al-
■
lowed to repair the device. Only use genuine
spare parts from Adolf Würth GmbH & Co.
KG. This is to ensure and maintain safe opera-
tion of the device.
Keep the workplace always dry and well
■
illuminated.
The mains voltage must be the same as the
voltage specified on the name plate.
The vapours generated during soldering are
■
hazardous to your health. If applicable use a
suitable suction system or ventilate the room
appropriately.
Touch the soldering iron only at the handle to
■
avoid burns. The entire front of the soldering
iron heats up during operation.
Do not deposit the soldering iron on a highly
■
combustible surface.
Do not use the soldering station in explosive
■
atmospheres or near flammable liquids, gases
or dust.
Prior to maintenance or cleaning work, unplug
■
the soldering station and allow the soldering
iron to cool down completely.
Check the cords regularly for damages (risk of
■
electric shock). Damaged cords must not be
replaced. A damaged soldering station must
be recycled in an environmentally compatible
manner.

For your safety

Disregarding this instruction manual and the safety
instructions may result in damage to the device
and may cause dangerous situations for the
operator and other people.
In case of transport damage inform your vendor
immediately.

Safety instructions

Never perform work on live components.
■
Keep the unused soldering station out of the
■
reach of children. Never allow persons who
are unfamiliar with this type of soldering sta-
tion to use it, nor anyone who has not read
these instructions.
This soldering iron is not intended for use by
■
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and/or knowledge, unless
they have been given supervision or instruc-
tion concerning use of the soldering station by
a person responsible for their safety.
Only use genuine Würth accessories
■
and spare parts.
WARNING – It is imperative that
the Safety instructions be read
before starting up the device for the
first time!
11