Grizzly ERT 450/8 Traducción Del Manual De Instrucciones Original página 121

those intended can result in
dangerous situations.
• Do not traverse gravel paths
while the equipment is operat-
ing. Gravel can be thrown up
and result in injury.
• Do not operate the equipment
in the vicinity of inflammable
liquids or gases as this could
give rise to the danger of a fire
or explosion.
• Store the equipment in a dry
place that is not accessible to
children.
CAUTION! The following
states how damage to the
equipment and possible inju-
ry to people can be avoided:
Taking care of the equipment:
• Ensure that the ventilation
openings are not clogged.
• Only use spare parts and ac-
cessories that have been sup-
plied or recommended by the
manufacturer.
• Never try to repair the equip-
ment yourself. All work that
has not been listed in these In-
structions must only be carried
out by an authorised servicing
agency.
• Treat the equipment with the
greatest care. Always keep the
equipment clean for better and
safer work. Follow the mainte-
nance instructions.
• Never overload the equipment.
Always work within the stated
capacity range. Do not use
low-power machines for heavy-
duty work. Do not operate the
equipment for purposes for
which it is not intended.
• Always inspect the equipment
before it is to be used. Do not
operate the equipment if safety
devices, parts of the cutting de-
vice or bolts are missing, worn
out or damaged.
Electrical safety:
CAUTION! The following
states how to avoid ac-
cidents and injuries due to
electric shock:
• Before each usage, check the
mains power cable and the
extension cable for damage
and signs of aging. Do not use
the device if the cable is dam-
aged or worn. Damaged mains
power cables increase the risk
of electric shock.
• Always keep the extension ca-
ble well away from the cutting
tools.
Should the power cable be-
come damaged during work,
then instantly disconnect
the power cable from the
mains. DO NOT TOUCH THE
POWER CABLE BEFORE IT
HAS BEEN DISCONNECTED
FROM THE MAINS! Risk of
electric shock.
• If the power cable for this
equipment is damaged, it must
be replaced by the manufac-
turer, a customer service agent
of the same or a similarly quali-
fied person in order to prevent
hazards.
• Check that the mains voltage
is the same as indicated on the
GB
121