Remaining Risks - OEM TL 45 Instrucciones De Uso

3.6. Remaining risks

The machine was designed to ensure the essential safety requirements for the operator.
Safety, as far as possible, has been integrated into the design and construction of the machine; however, there are still
risks from which operators need to be protected especially during:
transport and installation;
•
normal operation;
•
adjustment and set-up,
•
maintenance and cleaning;
•
dismantling.
•
Below, for each residual risk is provided a description, the area or part of the machine subject to the risk and the
procedural information on how to avoid it:
RISK
Electrical danger
Thermical danger
Dangers generated by
materials and substances
processed, used,
produced or discharged
from the machine
Dangers generated by
materials and substances
processed, used,
produced or discharged
from the machine
ATTENTION!
Do not carry out maintenance and cleaning tasks
It will be user care to:
• analyse the risks that may occur during a handling and installation phase inside your location (The analyses carried
out on the handling of the machine were made only in consideration of the its characteristics);
• delimit the path of forklift and/or laser vehicles driven with signs on the floor;
• raise awareness and educate the operations staff on workstations and who conducts the machine.
• apply visual safety signs in the work environment after assessing risks inside transit or control areas.
Page 106
DESCRIPTION AND PROCEDURAL INFORMATION
Contact of people with elements under tension.
Cleaning/maintenance always with the machine off
Only the PES/PAV electric maintainer with the suitability for work under voltage under
CEI 11-27, can perform extraordinary maintenance with suitable DPI.
Contact of people with elements that can cause burns, caused by contact with objects
or materials with an extreme temperature
Danger of fire or explosion (due to materials, powders, liquids, substances and gases,
used or produced).
Biological (mold) and microbiological dangers (viruses or bacteria).
EC-compliant use and warning instructions
de-energized the energies.
if you have not
CHAPTER 3 – SAFETIES