Setting Up Creative Sxfi Carrier - Creative SXFI CARRIER MF8345 Manual De Usuario

Connecting a Power Source
Note: To minimize power consumption, the soundbar will enter Network Standby Mode after 15 minutes of inactivity if no
digital source device is connected. The soundbar will exit Network Standby Mode upon receiving user's input or with audio
playback. You may encounter a few seconds of silence from the subwoofer while the wireless connection between the
soundbar and the subwoofer is re-established. After 28 hours of inactivity, the soundbar will enter Standby Mode. To turn
the soundbar on again, press the Power button on the Soundbar or Remote Control. If a connected HDMI CEC-compliant
TV or source device is connected to the soundbar, the soundbar will turn on and enter standby mode in sync with the
connected device. Standby timing, power synchronization over HDMI, and more are customizable using the Creative app.

Setting up Creative SXFI CARRIER

4 Press
to turn the system on
Connect the long mains cable to the
1
subwoofer
2 Connect the short mains cable
to the soundbar adapter
3 Connect the DC barrel
plug of the soundbar
adapter to the 24V / 4A
DC input on the rear
panel of the soundbar
EN
8