Promise Technology VTRAK J610s Guia De Inicio Rapido página 13

Figure 12.Drive carrier with SATA disk drive and AAMUX
SATA Disk Drive
•
•
Be sure each drive is securely fastened to its carrier. Proper
installation ensures adequate grounding and minimizes vibration.
Do not install drives with fewer than four screws.
AAMUX adapter
If you plan to operate your VTrak with fewer than a full load of
disk drives, install all of the drive carriers into the enclosure, to
ensure proper airflow for cooling.
A VTrak J610s or J310s carrier is similar in appearance but is
NOT interchangeable with a VTrak M500f/i/p drive carrier.
Cautions
Important
13
Step 3: Installing Disk Drives
SAS connector