Yedoo Tidit Instrucciones De Montaje página 11

MAINTENANCE
We recommend to entrust a professional service with it. Control regularly, eventually
tighten or adjust: screw connections, tightening mechanisms, lubricate sliding parts (wheels
bearings, handlebars bearings, cables, brake parts etc.), when dirty, clean with a humid cloth.
ATTENTION:
During the lubrication, the lubricant must not get onto the braking friction
surface of the rim and the brake lining, if this situation occurs, it is necessary to remove the
grease from all brake parts, eventually to clean with a technical gasoline. If during the riding
it starts to "crack" in the spokes, it is necessary to tighten all the wires of the wheels equally by
2 turns (we recommend to entrust with it a professional service), eventually to grease, adjust
or change the bearings and bearings parts. If the change of wheels is necessary, use always
wheels/tyres of the same parameters according to the original ones. Carry out the disassembly in
a contrary way than the assembly (see Operating instructions). Entrust the exchange or repair of
a tyre and inner tube to a professional service. If the scooter´s construction contains self-locking
nuts or other self-locking accessories, when unloosing and tightening them frequently, they lose
their effi ciency. In this case it is necessary to substitute respective parts.
SECURITY MEASURE
Before the assembly, study the operating instructions carefully. The maximum weight
capacity of the scooter is stated in the parameters of the model. To drive securely, use always
headpiece, knee protectors, elbow protectors, wrist protectors and solid shoes. This scooter
in its basic version is not intended for roads with car traffi c or for riding in the dark. Control
the screw connections, tightening mechanisms and brake/s regularly to avoid an eventual
accident when riding. We do not recommend to carry out adaptations of this scooter to other
models. Do not brake too rapidly and suddenly – you could fall down. The manufacturer does
not guarantee the damnifi cation or damage that may arise when using this product.
The scooter is designed only for 1 rider – co-riders are forbidden!
WARNING:
Mechanisms for decreasing the speed (brake lining, rims, tyres, eventually
rear contact brake) are becoming warm during the use and it is, therefore, not convenient to
touch them after the braking.
WHILE RIDING SCOOTER USE AVAILABLE PROTECTIVE
EQUIPMENT (HELMET, PROTECTIVE GLOVES ETC.).
GUARANTEE LIMITATION
The guarantee does not apply to a damage or loss of a respective part caused by a fall,
abrasion, incorrect assembly, non-adequate adaptation, jumping, acrobatic riding, headless
riding, competition riding, rough treatment, neglecting usual maintenance or using scooter
that is completed by any motor appliance.
The manufacturer reserves the right for changes of the operating instructions in the course of
the products development.
Importer to the EU: Intrea-Piko, s. r. o., Praha
10
|