Tabla de contenido
Publicidad
1735 Manual and Software CD-ROM
The accompanying 1735 CD-ROM contains software and additional product
information, including:
•
International Users Manuals. The Users Manual contains complete usage
instructions for the Logger.
•
Power Log PC software and Users Manual. Power Log is a simple
application designed to help you get the most from the Logger. Follow the
directions on the CD-ROM to install the software.
•
1735 Upgrade Utility for future Logger firmware upgrades
•
USB Drivers
Line Power or Battery Mode
The Logger operates continuously with the provided charging adapter or for
several hours with the built-in battery. The battery eliminates possible power
interruptions during logging sessions and provides operating power during
handheld troubleshooting and signal analysis.
When you operate the Logger with the ac adapter, the battery is automatically
charged. On the display, the symbol for "plugged-in" or battery is displayed
accordingly.
When LO-BAT is indicated, attach the ac adapter to recharge the battery. It
requires about 4 hours to recharge a fully-discharged battery. The Logger's
automatic charging circuit makes it impossible to over charge the battery.
Instrument Familiarity
Charge the battery before operating the Logger for the first time or
use the provided charging adapter.
Current Probes
Fluke flexi-sets or current clamps are automatically detected by the Logger
when the Logger is turned on. If you change current probes, turn the Logger
off and on again so the Logger can recognize the new probe.
1735 Manual and Software CD-ROM
Note
Power Logger
5
Publicidad
Tabla de contenido
