L1
L
N
Split Phase Connections
For Split Phase, the Neutral is center-tapped and there are two hot legs which
correspond to A and B test leads. AB is the voltage from phase to phase, which
is twice that of each individual hot leg. Refer to Figure 6 and connect the leads
as follows:
Voltage:
Network
Line 1
Line 2
Line 1
N
N
L2
L3
Figure 5. Single Phase Connections
L1
L2 L3 N
Test Leads
A (L1)
B (L2)
C (L3)
N
Power Logger
Measuring Functions
edx040.eps
13