Connecting The Logger To The Network - Fluke 1735 Manual De Instrucciones

Ocultar thumbs Ver también para 1735:
Tabla de contenido

Publicidad

Connecting the Logger to the Network

To prevent the risk of electric shock, when
connecting current circuits, the corresponding test
leads must first be connected to the Logger and then
to the load.
To prevent shock or personal injury, keep fingers
behind the tactile barrier, see Figure 4.
When using either flexi-probes or current clamp sets, make sure the
arrow on the current probe points towards the load.
Use the original cables only for connecting the current probes and the voltages
to the Logger. If these are damaged do not use them. Before connecting to the
load, make sure that all plugs are connected correctly to the Logger and
locked, in order to prevent contact with live conductors.
XWWarning
Single Insulated
Current Carrying
Conductor
Release
Button
Figure 4. Using the Optional Microclamps
Note
Power Logger
Measuring Functions
Load Direction
Arrow
Tactile Barrier
edx045f.eps
11

Publicidad

Tabla de contenido
loading

Tabla de contenido