Bang & Olufsen BeoVision 12 Manual Del Usuario página 11

Mount the wall bracket
We recommend that you leave the TV on the
service feet while you mount the wall bracket.
When lifting the TV, grip the top and bottom,
at least 10 cm (4") from each bottom edge.
Remember to carry the TV in such a way that it is
in an upright position at all times.
1 Mount one screw (1) to keep the wall bracket in
place. Mount one more screw (2) and ensure
that the bracket is level. Use the wall bracket to
mark the placement of the other holes to be
drilled and mount the wall bracket.
2 Remove the screw to detach the service feet (1).
Lift the TV off the service feet (2), then mount it
on the wall bracket (3). To mount the TV, you
must hold it in an angle of 9°.
3 If you connect the TV to your BeoSystem, while
the TV is mounted on the wall bracket, push
down the distance bracket, to access the
connection panel. When you have made the
connections, push the distance bracket into
place again.
4 Use the screw to adjust the position of the TV.
Dismount the TV from the wall bracket
1
1
3
Handling Due to the heavy weight of the TV, any moving or lifting of the TV should be performed by qualified
personnel – using the proper equipment.
Before you lift off the TV, push down the distance bracket, and attach the enclosed service feet. To lift
the TV off the wall bracket, you must pull out the TV at the bottom to make an angle of 9°, then lift it off.
2
2 1
2
4
11
3
9°