ADJUSTMENTS
Button
Function
ON/OFF SWITCH
ON/OFF
SUMMER/WINTER SWITCH
BOILER RESET
RIARMO/RESET
PROG./MODE
P R O G R A M
(DISPLAY)
1) Press (MODE). An indicator light on the left-hand display comes on.
2) Press (STEP) to phase 4.
3) Press the (+) (-) buttons to modify the hot water temperature.
4) Press (STORE) to memorise the data.
5) Press (MODE) twice to enter the new temperature setting.
IGNITION
Open the gas tap, press the ON button. The burner will ignite automatically (the heating and hot water
functions are set by the manufacturers).
Should the unit fail to ignite there will be another two ignition attempts after which there will be a
shutdown (the display will flash 2 - 02). Press RESET: if the unit still fails to ignite contact the technical
assistance service.
All manuals and user guides at all-guides.com
S E L E C T O R
Button
Function
SELECTS PARAMETERS TO BE
SEQUENZA/STEP
DISPLAYED
ENTERS DATA
MEMO/STORE
+
INCREASES SETTING
DECREASES SETTING
-
HOT WATER ADJUSTMENT
0-60°C
16