Glatz Sombrano Modo De Empleo Y Opciones página 13

Ocultar thumbs Ver también para Sombrano:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 15
Standard equipment
• Sunshade with turnable
pressure foot
• Crank
• Binding belt or sewed on cord
• Protective cover
• 5 fastening screws with washers
• Assembly tool (4 pieces)
Correct use according to our instructions
may be used as a weatherproof sun protection system
The Sombrano
®
only. The wind safety of the open sunshade is limited.
Safety regulations
• The protection effects against the harmful UV irradiation are largely
dependent on local conditions. Additional measures might be
necessary to protect your skin.
• In case of freshening winds or imminent gale-like winds or gusts,
the sunshade needs to be closed. The sunshade must not be allowed
to flap in the wind. Otherwise, the fabric could get damaged.
• Never leave open sunshades unattended. Possible damages are not
covered by our guarantee.
• When operating the sunshade, make sure that no persons and/or
objects are within reach of the moving parts. Otherwise, physical
injuries and/or material damages might be caused.
• The anchorage must suit the corresponding sunshade size.
Options
• Various sunshade bases
• Ground socket (to cement in)
• Ground plate
• Wall clamp
• Lighting
Maintenance and care
• Open the wet sunshade to dry.
• Put the protective cover only on a dry sunshade.
• Store the dry sunshade in a sheltered place.
• If necessary, clean the fabric with lukewarm water, mild-action
detergent and a sponge. In case of need, treat the fabric surface
with a fluor-containing impregnating spray.
• Possible slide marks on the aluminium bars may be wiped off with
a wet cloth.
• Most of the defective sunshades can be repaired by your Glatz
partner. Use only original Glatz spare parts.
Lifespan
Proper care and regular maintenance make sure that your Sombrano
will give you lots of joy for many years.
The sunshade consists of metal and synthetic pieces. The disposal at
the end of the lifetime has to be carried out according to the regional
rules governing such matters as environment and disposal methods.
GB
®

Publicidad

Tabla de contenido
loading

Tabla de contenido