geberit EFP 202 Instrucciones De Servicio página 23

Troubleshooting before the pressing sequence
Fault
Pressing tool cannot be
started
1) The addresses of authorised repair shops can be requested from the Geberit sales companies or found
at www.geberit.com
Troubleshooting during the pressing sequence
Fault
Pressing tool stops moving
B966-003 © 05-2015
965.596.00.0 (02)
Cause
Mains cable is not connected
Mains cable or mains plug is
defective
Cause
Power failure
Actions
Connect the mains plug to
the power supply system
Have the mains cable and
mains plug examined at an
authorised repair shop and
replaced if necessary
Actions
Release start button
Examine the pressfitting for
tightness and repeat the
pressing operation if
necessary
EN
1)
23