Assembly Of Pram Body - Emmaljunga Mondial Manual De Instrucciones

Assembly of pram body

1
2
"Klick" "Klick"
1
2
2
2
3
1
3
2
1
5
4
6
5
7
9
Duo Combi v 7.4
Assembly of pram body
• Remove plastic covers from mattress, apron, Hi Pro, interiorlining
and discard. The bottom of the Mondial/Edge pram body are made
of Thermobase (no picture). The bottom of the Smart pram body is
made of wood (picture).
WARNING
1
• Choking Hazard. Keep plastic covers away from children.
• Make sure the two metal support brackets are securely locked.
The fit will be tight to ensure stability and safety.
• In order to rise the pram body, pull the metal bar along the bottom
until it clicks into one of the plastic parts.
• Pull one side of each metal bar in position (1) and then the other
side (2) so that both sides clicks into the plastic parts (3).
• Repeat the same steps with the metal bar on the other side of the
pram body.
WARNING
• Before using the pram body, make sure that the metal bars have
clicked into all four plastic parts (3) so that the frame of the
pram body is held firmly in place.
Folding the pram body
• Lift the mattress.
• Pull the metal bar past the button (5).
• Repeat same steps on all four sides on the pram body.
• Pull the metal bars along the bottom and fold the pram body.
• Place the Hi Pro (6) towards the side of the Pram body's head-end
for added protection. (not Smart)
• Fold the interior lining around the rim of the pram body. Fasten
the velcro of the head-end of the pram body (7). Make sure the
trimmed hole (9) on each side of the lining is threaded around the
plastic holders (one on each side of the pram body).
9
95