Replacement Parts - TEUFELBERGER treeMOTION USCA Manual Del Usuario

Limitations oF Use
pic. 12
pic. 14
rope system with friction hitch adjuster.

4. REPLACEMENT PARTS

Product specific instructions are in-
cluded with every replacement part.
– Upper Assembly treeMOTION USCA
7333211
– Replacement Rope Bridge 7333212
– Hip-Front D Replacement Kit
7333208
– Leg Loops (right: 7333206 / left:
7333207)
– Replacement Leg Padding (1 pair)
7333209
– Comfort Back Padding 7359960
– Gear Loops for treeMOTION USCA
7333213
– Standard Back Padding 7333214
Shoulder straps and load bearing
assembly (Part no. 7333211)
12
Upper harness (shoulder straps and
load carrying assembly) are non-PPE
elements and not intended for fall ar-
rest. The harnesses may only be used
for work positioning to AS/NZS 4488.1
in conjunction with the shoulder straps.
No fall- arrest harness!
pic. 13
Replacement rope bridge
(Part no. 7333212)
If the green mantle is ruptured by any
means (e.g. cutting, heating or abrasion)
or a tactile inspection of the kern identi-
fies changes in diameter or rope prop-
erties, the rope bridge shall be replaced
immediately by, or under the supervision
of, a competent person.
For replacement, it is imperative that
you use only the replacement part ap-
pwroved by the manufacturer. Before
using the equipment again, be sure to
verify that the spare part has been re-
placed correctly. If you lack the expe-
rience, skills, and knowledge that are
necessary for this job, please consult a
compentent person or the manufacturer.
In general, repairs may only be carried
out by the manufacturer.
Additional tests were carried out at TÜV
pic. 15
pic. 16