Joystick Alya Joystick Lever Assembly; Ordinary Maintenance; Cleaning; Parabola Cleaning - DKL CHAIRS D2-Prophylaxe Manual Del Usuario

4.2

JOYSTICK ALYA JOYSTICK LEVER ASSEMBLY

- Fully insert lever "A"on the pin of the joystick.
- The hole in lever "A" must be positioned corresponding to surface "B".
- Fully screw in grub screw "C" with the wrench supplied.
Attention
The control joystick must be handled with care to avoid breakages. Never move
the light using the joystick to grip.

5. ORDINARY MAINTENANCE

There are no ordinary maintenance operations.

6. CLEANING

Warning against danger of wear and corrosion and falling suspended
weights
For all metal or plastic parts of the light, it is strictly forbidden to use substan-
ces that are abrasive, acid, substances containing chlorine or chloride ions,
detergents with Trilene base, petrol, white spirit or similar.
It is forbidden to directly spray any chemical substance on the device.
6.1

PARABOLA CLEANING

Cleaning must be carried out using a soft cloth in cotton or absorbent cotton with ethyl alcohol
or the specific PERFLEX detergent. Water-alcohol based disinfectants are suitable with 70%
isopropyl alcohol or ethanol.
Attention - potential damage or wear on the parabolas
Never spray detergent directly on the parabolas.
Cleaning operations on the parabolas must be carried out wearing gloves, to
avoid leaving fingerprints on the surfaces.
Never use detergents containing surfactants or water-repellents that depositing
can leave streaks. Slight streaking will not prejudice the quality of the light.
Products differing from those suggested could damage the parabolas.
If in doubt, contact FARO customer care.
B
A
C
61