CTA HCAT TE 0011 Manual De Instalación Y Mantenimiento página 67

If the parameters set on the microprocessor require verifi-
cation or modification, a password must be used to enter a
higher level, accessible to authorised service centres only.
Follow the instructions below:
- press the ON-OFF key;
- press the ON/OFF and MODE keys together for one
second;
1 2
HSA3
the tP parameter appears on the display;
- press the and
meter;
1 2
Pss
HSA3
- press the ON/OFF and MODE keys together for one
second;
1 2
- - -
HSA3
- press the and
parameter;
- press the ON/OFF and MODE keys together for more
than two seconds to confirm the password;
- press the and
meter;
1 2
PA r
HSA3
- press the ON/OFF and MODE keys together for one
second;
1 2
Cn F
HSA3
- press the and
parameters to modify or display;
1 2
CP
HSA3
HCAT TE - HCAN TE
mode
t P
set
on
off
keys to select the Pss para-
mode
set
on
off
mode
set
on
off
keys to select the password
keys to select the PAr para-
mode
set
on
off
mode
set
on
off
keys to select the family of
mode
set
on
off
- press the ON/OFF and MODE keys together for one
second;
1 2
C0 1
HSA3
- press the and
the parameter selected;
1 2
1 8 0
HSA3
- press the and
the parameter selected;
- setting completed.
- press the ON/OFF and MODE keys together for more
than two seconds;
1 2
C0 1
HSA3
- press the ON/OFF and MODE keys together again for
more than two seconds;
1 2
CP
HSA3
- press the ON/OFF and MODE keys together again for
more than two seconds;
1 2
PA r
HSA3
- press the ON/OFF and MODE keys together again for
more than two seconds;
1 2
HSA3
The word "On" is displayed, together with either the heat-
ing or cooling LED depending on the mode selected.
For the list of parameters, contact the authorised
service centre.
mode
set
on
off
keys to display the number of
mode
set
on
off
keys to modify the value of
mode
set
on
off
mode
set
on
off
mode
set
on
off
mode
set
on
off
English 07/03 29