Vornado 660 AE Manual Del Usuario página 12

CLEANING
BLADE REMOVAL
Pliers required.
WARNING: Always unplug device before servicing or cleaning to avoid possible injury due to remote activation of the product. To
reduce the risk of electrical shock and injury to persons, unplug the circulator before removing blade.
1. First, remove the nut from the shaft
by turning the nut clockwise to
loosen. Remove the washers. Pull the
blade straight out from the shaft.
2. Wipe the Blade with a damp cloth.
If your circulator is used in a greasy
environment, such as a kitchen, mild Remove Nut
soap or a common household cleaner
Clockwise
may be necessary. Do not use sol-
vents. Do not place blade in the dish-
washer. The excessive heat can distort
the plastic.
3. To reattach - be certain the fl at side
of the shaft aligns directly with the
corresponding fl at side on the blade's
socket. Push the blade all the way on
the shaft until it bottoms out. Do not
use a hammer as this could result in
bearing damage. Reinstall fl at wash-
er, spring washer, and then nut.
12 English
CARACTÉRISTIQUES
JET D'AIR
ORIENTABLE
Dirigez le jet
tourbillonnaire où
vous le désirez.
VITESSES MULTIPLES
Un réglage de vitesse pour chaque
niveau de confort.
CONCEPTION À L'ÉPREUVE
DES PETITS DOIGTS
Résiste aux doigts curieux.
GRILLE AMOVIBLE
Facilite le nettoyage.
ENTRÉES D'AIR
Entrées d'air à conception
exclusive et moteur puissant qui
déplace beaucoup d'air.
PATTES EN SILICON
Les pattes ne laissent aucune marque et
améliorent la stabilité.
Français
33