Movement R5i Manual Del Propietário página 73

EQUIPMENT ASSEMBLY
CAUTION!
Before starting to assemble your treadmill, care must be taken to ensure the
following:
•Make sure that the packaging is not damaged and that the parts and
components of the equipment are not damaged..
•It is recommended that the treadmill be unpacked at the place where it will
be assembled.
•The assembly location must be clean.
•The floor must be level, firm and hard to prevent treadmill instability.
•The space around the treadmill must be free as described in this Manual.
•It is recommended that the treadmill be mounted away from moisture and
sheltered from sunlight in order to avoid damaging the electronic parts of
the equipment.
The assembly of this equipment requires the following tools:
DANGER!
Do not leave plastic bags or boxes over the floor. Risk of suffocation in both
children or animals.
TOOLS
Allen Screw
n°6
NOTE: Keys included in the equipment
SPACE
We advise the user to use a minimum access
and escape area as shown on the right. The
access and escape area may be common
among the treadmills used.
Hexagon wrench
with T handle
50%
100%
Diamter [mm]
60 cm
60 cm
19
ICON
Do not give
the screws a
final tightening
Apply the final
tightening to
the screws
SCREW TIGHTENING TORQUE
SPECIFICATION TABLE
Torque [N.m]
M6 9-12
M8 22-29
M10 45-58
60 cm
2 m