Descargar Imprimir esta página

Federal Signal 3600 Serie Hoja De Instrucciones página 3

Publicidad

Idiomas disponibles

Idiomas disponibles

People's lives depend on your safe installation of our products. It
is important to read, understand and follow all instructions shipped
with the products. In addition, listed below are some other important
safety instructions and precautions you should follow:
To properly install this light: you must have a good understand-
ing of automotive electrical procedures and systems, along with
proficiency in the installation and use of safety warning
equipment.
DO NOT install equipment or route wiring or cord in the deploy-
ment path of an air bag.
When drilling into a vehicle structure, be sure that both sides of
the surface are clear of anything that could be damaged.
Locate light control so the VEHICLE and CONTROL can be oper-
ated safely under all driving conditions.
Do not attempt to activate or deactivate light control while driv-
ing in a hazardous situation.
You should frequently inspect the light to ensure that it is oper-
ating properly and that it is securely attached to the vehicle.
File these instructions in a safe place and refer to them when
maintaining and/or reinstalling the product.
Failure to follow all safety precautions and instructions may result in
property damage, serious injury, or death to you or others.
I.
GENERAL.
The Federal Signal Model 3600 Series is an economical LED light which is de-
signed for recessed mounting, rear door mounting, or surface mounting. It must work
with Federal Signal Flashers and must be fused at 1 amp for reverse polarity protec-
tion. The 3600 Series light incorporates six LED's.
II.
UNPACKING.
After unpacking the light and the mounting kit, inspect it for damage that may
have occurred in transit. If the unit has been damaged, do not attempt to install or op-
erate it. File a claim immediately with the carrier, stating the extent of damage. Care-
fully check all envelopes, shipping labels, and tags before removing or destroying them.
Ensure that the parts listed in the appropriate KIT CONTENTS LIST are included in
the package.
INSTRUCTION SHEET
3600 SERIES LIGHTHEAD AND MOUNTING KIT
SAFETY MESSAGE TO INSTALLERS
FOR
-1-

Publicidad

loading

Este manual también es adecuado para:

360-401-04